What blade angle should I use for standard vinyl cutting?

Start with a 45-degree blade for standard vinyl (calendered or cast, 3–5 mil). It is the general-purpose angle that handles most sign-making vinyl, HTV, and printable materials. Switch to 30 degrees for fine detail and small text under 10 mm. Use 60 degrees for thick materials like floor graphics, sandblast film, or heavy printable vinyl.

Are these blades compatible with genuine Roland blade holders?

Yes — these compatible blades fit the standard Roland blade holder (the gold or silver coloured holder used on CAMM-1, GS, GX, and VS series cutters). The blade shank diameter and depth specification match Roland's standard. No adapter or separate holder is required.

When should I replace my Roland cutter blade?

Replace the blade when you notice: corners not cutting cleanly, the vinyl tearing instead of cutting, lifted edges after weeding, or the need to increase cutting force above what previously worked. On standard vinyl, most sign makers replace every 5–10 linear metres of production cutting. Cutting abrasive materials like reflective vinyl or glitter film reduces blade life significantly — use the reflective-rated blade for those materials.

What is the reflective blade used for?

The 45/60-degree reflective blade has a reinforced tip designed for thick, abrasive materials: retroreflective vinyl, glitter heat transfer film, flock HTV, and other materials with coarse or textured surfaces that quickly blunt a standard carbide tip. It cuts the same thickness range as a standard 60-degree blade but lasts significantly longer on those abrasive surfaces.

Cutter Blades for Roland Vinyl Cutters - pack of 5 - 45 degree Reflectie Blade (thick media)

Name: Cutter Blades for Roland Vinyl Cutters - pack of 5 - 45 degree Reflectie Blade (thick media) - Biz Supplies
SKU: roland-blade-45-reflective
Price: 45.45 AUD
Availability: InStock

$45.45 ex GST

OPTIONS: pack of 5 – 45 degree Reflectie Blade (thick media)

In Stock

Volume Pricing

Qty*	Save	Your Price
1 - 4	0% OFF	$45.45
5 - 9	10% OFF	$40.91
10 +	20% OFF	$36.36

SKU: roland-blade-45-reflective

Replacement Cutter Blades for Roland Vinyl Cutters — 5-Pack, All Angles

These are compatible replacement blades for Roland CAMM-1 series and GS/GX/VS series vinyl cutters, supplied in packs of five. The blades fit the standard Roland blade holder (the same holder used with genuine Roland blades) — no adapter required. Blade life depends on material and cutting force, but most sign makers use a fresh blade every 5–10 metres on standard vinyl; these packs keep a stock rotation going without the cost of genuine Roland consumables on every change.

Choose the right blade angle for your material and design:

Blade angle	Best for	Typical use
30°	Thin films, fine detail, small text	Window tint, fine lettering under 10 mm, intricate shapes
45°	General purpose	Standard vinyl (3–5 mil), everyday sign cutting — start here if unsure
60°	Thick materials, large designs	Floor graphics, sandblast film, thicker printable vinyl
45° / 60° Reflective	Thick specialist materials	Reflective vinyl, glitter HTV, flock HTV — reinforced tip for abrasive surfaces

To extend blade life: reduce cutting force to the minimum that still cuts cleanly through the vinyl but not through the liner; replace the blade at the first sign of tearing or lifting corners; keep blades dry and stored in the cap when not in use.

Property	Detail
Compatible cutters	Roland CAMM-1, GS, GX, VS series (standard blade holder)
Pack size	5 blades
Available angles	30°, 45°, 60°, 45/60° Reflective
Blade material	Tungsten carbide
Genuine Roland	No — compatible replacement

Weight	0.1 kg

Cutter Blades for Roland Vinyl Cutters - pack of 5 - 45 degree Reflectie Blade (thick media)

Volume Pricing

Replacement Cutter Blades for Roland Vinyl Cutters — 5-Pack, All Angles

Join Our Newsletter

Login