Replacement Cutter Blades for Roland Vinyl Cutters — 5-Pack, All Angles
These are compatible replacement blades for Roland CAMM-1 series and GS/GX/VS series vinyl cutters, supplied in packs of five. The blades fit the standard Roland blade holder (the same holder used with genuine Roland blades) — no adapter required. Blade life depends on material and cutting force, but most sign makers use a fresh blade every 5–10 metres on standard vinyl; these packs keep a stock rotation going without the cost of genuine Roland consumables on every change.
Choose the right blade angle for your material and design:
| Blade angle | Best for | Typical use |
|---|---|---|
| 30° | Thin films, fine detail, small text | Window tint, fine lettering under 10 mm, intricate shapes |
| 45° | General purpose | Standard vinyl (3–5 mil), everyday sign cutting — start here if unsure |
| 60° | Thick materials, large designs | Floor graphics, sandblast film, thicker printable vinyl |
| 45° / 60° Reflective | Thick specialist materials | Reflective vinyl, glitter HTV, flock HTV — reinforced tip for abrasive surfaces |
To extend blade life: reduce cutting force to the minimum that still cuts cleanly through the vinyl but not through the liner; replace the blade at the first sign of tearing or lifting corners; keep blades dry and stored in the cap when not in use.
| Property | Detail |
|---|---|
| Compatible cutters | Roland CAMM-1, GS, GX, VS series (standard blade holder) |
| Pack size | 5 blades |
| Available angles | 30°, 45°, 60°, 45/60° Reflective |
| Blade material | Tungsten carbide |
| Genuine Roland | No — compatible replacement |
| Weight | 0.1 kg |
|---|
Be the first to review “Cutter Blades for Roland Vinyl Cutters”
You must be logged in to post a review.
Related products
Cutter Blades & Holders
Cutter Blades & Holders
Cutter Blades & Holders
Cutter Blades & Holders
Reviews
There are no reviews yet.