Use for make stubby holders from stubby panel
How to use:
Temperature: 110C
Time: 10S
Heat Seal Tape for Sublimation Stubby Holders: How It Works
Sublimation stubby cooler panels are flat polyester sheets that you print, then form into a cylinder by joining the two short edges. This 12mm × 23m heat seal tape is the joiner — applied with a heat press at 110°C for 10 seconds, it bonds the seam permanently and invisibly from the outside of the finished cooler.
One 23m roll provides approximately 200+ seam joins at standard stubby holder height, making it cost-effective for production runs. The tape bonds to polyester and neoprene-type sublimation stubby panels — it is not designed for general fabric or paper bonding.
Specifications
| Specification | Detail |
|---|---|
| Width | 12mm |
| Length | 23m per roll |
| Application temp | 110°C |
| Press time | 10 seconds |
| Pressure | Medium — use flat heat press |
| Compatible with | Sublimation stubby cooler panels (polyester/neoprene face) |
| Approximate joins per roll | 200+ |
Frequently Asked Questions
| Weight | 0.5 kg |
|---|
Be the first to review “Heat Seal Tape for Stubby Holders (12mm x 23m)”
You must be logged in to post a review.
Related products
Stubby Holders
Heat Tape
Heat Tape
Stubby Holders
Apparel & Textiles
Blank White Sublimation Cushion Cover - Satin Finish (40x40cm)
Reviews
There are no reviews yet.